Ice Bath O2 PRO

The tubs are connected to a chiller that, through continuous water circulation and an internal refrigerant gas, lowers the temperature to as low as 3°C. This allows you to enjoy the benefits of cold-plunging year-round, without constantly buying ice bags. Our chiller uses inverter technology, meaning it regulates motor speed instead of running at full power or shutting off completely. This results in lower, more efficient energy consumption. For example: once the desired temperature is reached, the chiller reduces power but keeps water circulating. If the temperature rises by 2–3°C, it automatically turns up again.

No. Our tubs are designed to fit anywhere. You don’t need a nearby water supply — simply fill or drain using the included submersible pump and a hose. The only requirement is a standard single-phase 220V outlet within 1.5 meters.

Not at all. If you plan to use it every morning, for example, the best option is to turn on the chiller at night. Once the water reaches your chosen temperature, the chiller reduces power and only regulates within the selected range.

It depends on the initial water temperature and ambient conditions. On average, water cools at 5–6°C per hour. In winter it takes less time, while in summer it may take longer. This timing applies mainly to the first cooldown — once cold, the thermal cover helps keep temperatures low for much longer. And for the jacuzzi mode: the water heats up 7-8 °C per hour.

Yes. Both the tub and chiller are fully outdoor-ready. The chiller is IPX5-certified, meaning it can withstand rain. However, make sure the electrical outlet is properly protected from water exposure.

No. With the advanced filter, the same water can last up to 15 days. You can also add our ionizers to extend the water's lifespan. Water replacement frequency depends on usage and whether the thermal cover is kept in place (which prevents the accumulation of dust and debris).

Thanks to inverter technology, our Pro Chiller runs at peak efficiency. It consumes
just 573 watts per hour — meaning each plunge costs under €1.
*This calculation is based on an average of 3 hours of daily machine usage, under
normal ambient temperature conditions.

No plumbing required. To fill: place the submersible pump in a tub or container filled with water, attach the hose, and fill your icebath. To drain: place the pump inside the icebath and direct the hose wherever you want the water to go.

Not at all. The new Pro Chiller is the quietest on the market. With inverter technology, the compressor is barely audible when running at low power.

Not everyone. People with cardiovascular or respiratory conditions, high blood pressure, epilepsy, pregnancy, and other health concerns should avoid it. Always consult your doctor if unsure.

If you plan to place the system on a balcony or any surface where load capacity is uncertain, it’s essential to first consult a structural engineer to confirm the space can safely support the weight.